|
PURPOSE
The Deactivation & Decommissioning
(D&D) and Facility Engineering (DD/FE) Working Group is a
working committee whose intent is to facilitate the
objectives of the Energy Facility Contractors Group (EFCOG)
to partner with the Office of Deactivation & Decommissioning
and Facility Engineering in the U.S. Department of Energy
(DOE) Office of Environmental Management (EM) in identifying
and addressing key opportunities for improved performance in
D&D safety and project execution across the DOE complex
through application of experience and technology transfer.
OBJECTIVES
-
Promote, coordinate, and
facilitate the active exchange of successful D&D
programs, practices, procedures, technology and other
pertinent information of common interest which have been
effectively utilized by contractors and subcontractors
for DOE facilities as well as in nuclear power plant
decommissioning and other environmental cleanup
scenarios.
-
Identify, analyze and produce for
distribution through EM Headquarters important lessons
learned that could in a safe manner reduce life cycle
costs of EM’s D&D Program.
-
Develop D&D case studies for
future workshops / training courses.
SCOPE
-
The DD/FE Working Group will
operate within the scope of EFCOG.
-
The area to be addressed by the
DD/FE Working Group is facility D&D.
-
The DD/FE Working Group will
facilitate interaction with outside agencies and
organizations regarding application of D&D principles
and methods in the DOE complex.
-
The DD/FE Working Group will
communicate with other EFCOG groups to avoid duplication
of effort.
-
Facilities will be covered from
the point of ceasing their operating mission through
their final declaration of cleanup status. However,
activities during the operating mission that prepare for
efficient and safe D&D when the mission ceases will be
also be within the scope.
-
The DD/FE Working Group will not
lobby, advocate independent positions, or try to change
DOE policy. However, D&D practices as applied to DOE
missions may be discussed and suggestions for
improvement made to the DOE.
ORGANIZATION
-
A Management Steering Committee,
chaired by the DD/FE Working Group Chair and consisting
further of the Sponsoring Director, the DOE Sponsor, and
at least one other person with EFCOG Working Group
experience, will provide feedback and guidance on DD/FE
Working Group direction and deliverables.
-
The Chair of the DD/FE Working
Group will initially be designated by the Sponsoring
Director for a term of approximately one to two years.
-
The Vice-chair and a Secretary
will be elected by majority vote of the Working Group’s
membership, with the term of office normally being one
year. The Vice-chair will normally succeed the Chair.
The Secretary may be re-elected to the position from
year to year. If for any reason the Chair position is
vacated, and the Vice-Chair is unable to assume the
duties as Chair, the Working Group’s membership may
elect an interim Chair by majority vote.
-
The Chair and Vice-Chair will
direct the overall activities of the DD/FE Working
Group.
-
Membership in the DD/FE Working
Group is open to current EFCOG members and associate
members, and one or more DOE sponsor representatives.
Non-EFCOG member companies, providing services to the
DOE, may designate participants (non-voting) who serve
on the Working Group with the Chair’s approval.
-
The DD/FE Working Group will
maintain a balance in membership, to the degree
possible, with individuals representing the full
spectrum of DOE Facility D&D activities. Annually,
membership of the Working Group will be reviewed by the
Steering Committee to ensure appropriate representation
is being maintained.
-
A roster shall be prepared and
maintained to include each member and participant’s
name, organization, contact information, and
member/participant status.
-
The DD/FE Working Group Chair, in
conjunction with the Group’s DOE Sponsor, may identify
DOE headquarters and field office points of contact.
-
The DD/FE Working Group Chair may
identify and establish liaison points of contact with
external organizations (e.g., INPO, ASME, ANS, EPRI) to
further the objectives of the Working Group.
PROCESS
(including Deliverables, Duration, and Effectiveness)
-
Changes to the DD/FE Working
Group Charter require majority concurrence of the
membership. The Steering Committee shall review the
charter, and the Board is the final approval authority
for the charter.
-
The DD/FE Working Group will
follow the DD/FE Working Group and EFCOG Charters, abide
by the EFCOG Executive Council and Working Group Manual,
and operate under the guidance of its Steering
Committee.
-
The DD/FE Working Group shall
create and operate per an annual plan that focuses on
producing tangible products or results and is pursued
with project management-type discipline.
-
DD/FE Working Group meetings will
be held as determined necessary by the DD/FE Working
Group Chair.
-
The DD/FE Working Group may hold
workshops, seminars or other meetings to execute their
stated objectives. Reimbursement for costs associated
with the above shall be in accordance with approved
EFCOG guidelines.
-
The DD/FE Working Group Chair
will annually report to the EFCOG Board of Directors on
the group’s achievements and cost savings or other
benefits for members resulting from sharing information
or participating in DOE’s order implementation studies.
The Board of Directors will determine whether the group
should continue, disband, or be reconstituted.
-
The DD/FE Working Group Chair is
designated as the single point of contact for official
EFCOG DD/FE Working Group communications.
|