1189 Workshop Information

Documents & Presentations

May 2008

Workshop Agenda

Panel Discussion Group 1- Experiences with Development and Maintenance of the Safety Design Strategy

• DOE-STD-1189-2008 Workshop - Panel Discussion Points  - Grant Ryan, Fluor Hanford

• Safety Design Strategy and the Y-12 National Security Complex Uranium Processing Facility Project - Bates Estabrooks, UPF Safety Basis Team Lead, B&W Y-12

• Safety In Design Workshop - Safety Design Strategies - John Schwenker, SRS

Panel Discussion Group 2 - Project Safety Integration Project Engineers Perspective with/without 1189

• Implementation of DOE-STD-1189 on the Uranium Processing Facility Project - Bill Zulliger, PE, PMP, UPF Engineering Manager, B&W Y-12

• Sodium Bearing Waste Disposition Project, Project Overview for implementing Safety Into Design - Bill Kerley, Chief Engineer, Idaho Cleanup Project

• Cross-Walk of Project vs. Draft 1189 - Bill Kerley, Chief Engineer, Idaho Cleanup Project

• Evaluation of DOE-STD 1189, Integrating Safety Into the Design Process McClure for Sasser, CMRR Project Los Alamos National Laboratory

• BWXT Y12 UPF Project - Integrated Management Plan, Work Process Flow Diagram, All Functions Level 1

• BWXT Y12 UPF Engineering Work Process Diagram - Level 1 XX YY ZZZZ Rev C, 12 Jan 07

 Panel Discussion Group 3 - Major Mod Evaluations

• DOE-STD-1189-2008 Workshop Panel Discussion Points - G. W. Ryan

• Safety In Design Workshop - Major Modification Determinations - John Schwenker, WSRS

• Safety in Design Workshop - Major Modification Determinations at Y-12- Bruce Wilson, B&W Y-12

 Panel Discussion 4 - Formation and Operation of the Safety Design Integration Team

• DOE-STD-1189-2008 Workshop Panel Discussion Points - G. W. Ryan

• UPF Implementation of DOE-STD-1189 - Integrating Safety Into The Design Process - Lynn Harkey, B&W Y-12

• Integrating Non-Nuclear Safety in Design - Gary Hagan, B&W Y-12

• Safety Design Integration Team SDIT - Teresa Robbins, NNSA Y-12 Site Office

Panel Discussion 5 - Establishment and Implementation of Safety Design Criteria

• Development of Nuclear Safety Design Criteria - Bates Estabrooks, B&W Y-12

• Integrating Nuclear Safety and Engineering Design - Jerry Bueck, Nuclear Safety Manager, NSTec,  NTS Omicron

 Panel Discussion 6 - New Seismic Design Criteria and Determination of Damage Limit States

• Implementation of DOE-STD-1189 Appendices A, B, and C - Joe Hunt, B&W Y-12

• Overview of ASCE/SEI Standard 43-05 Seismic Design Criteria for Structures, Systems, and Components in Nuclear Facilities - Mike Salmon, Chair, ASCE DANS Committee, LANL

• Integration of Safety into Seismic Design Process Through ANS 2.26, ASCE 43 & DOE-STD-1189 - Quazi Hossain, LLNL

• Implementation of the Seismic Design Criteria of DOE-STD-1189-2008, Appendix A Safety System Design Criteria (Project Hanford Management Contract) - Sean Fargo, Fluor Hanford

Facilitated Open Session: What is needed to complete 1189 implementation?  Facilitator: Charlie Kronvall, Fluor Hanford

Tobin Oruch, Engineering Practices Working Group (EPWOG) Secr
Los Alamos Nat'l Lab -- Eng Standards Mgr ph (505) 665-8475  fx 5-9835
oruch@lanl.gov

EPWOG is a peer group of DOE, site, national laboratory, and contractor engineering management professionals, and a working group of the Energy Facility Contractors Group (EFCOG).  More information can be found at http://www.efcog.org/wg/ep/index.htm or by contacting me