Electrical Hazard Awareness Training for Electrical and Non-Electrical Personnel

Updated - 07/21/08

Facility Electrical Worker Training

Electrical Measurement Safety - 09/17/07

Guidance for Identifying Spurious Voltages in Isolated Electrical Systems - 11/28/07

Facility Non-Electrical Worker Training

Module 1 - General Electrical Safety Awareness - 12/05/06

Module 2 - Electrical Cord Safety - 12/05/06

Module 3 - Electrical Safety for Arc Welding and Plasma Cutting - 12/05/06

Module 4 - Electrical Safety Working Near Overhead Power Lines - 12/05/06

Module 5 - Electrical Safety During Excavation and Trenching - 12/05/06

Module 6 - Electrical Safety for Skilled Worker - 12/05/06

Module 7 - Electrical Safety for Radiological Control Technician - 09/17/07

Module 8 - Electrical Safety for Subcontractors - 10/19/07

Module 9 - Battery Safety and Handling - 10/19/07

Electrical Safety Awareness Study Guide for Instructors and Students - 12/05/06

Electrical Safety Links and Technical Information

Selective Coordination 2008 NEC Requirement  - 06/19/08

Supplementary Training Sources

Video- Arc Flash Event Racking Breaker - 07/21/08

Thermal Burn from an Automotive Battery- Photos - 06/27/08

Arc-Flash Safety Handbook (Littlefuse) - 09/17/07

NIOSH Electrical Safety Student Manual - 12/05/06

Managing Power Line Hazards - 12/05/06

Video-Boom Truck Contact with Overhead Power Line - 12/05/06

Video - An Interview With Worker After Arc-Flash Event (NIOSH) -Note: If you cannot load this video, you can click here to go to the Direct link to NIOSH and view the video - 09/17/07

Video - Counterfeit Electrical Cords - 09/17/07

Video - Extension Cord Safety - 09/17/07

Video - Power Line Safety - 09/17/07

Video - Wired for Safety - 09/17/07

R&D Worker Training

R&D Core Module - Basic Electrical Safety For R&D Electrical Worker

Module R&D 1 - High Power Electrical Safety (HV, HC, Capacitor and Inductor safety)

Module R&D 2 - Radiofrequency and Microwave Safety

Module R&D 3 - Batteries and Battery Bank Safety

Module R&D 4 - R&D Grounding and Shielding

Module R&D 5 - Computer Safety

Module R&D 6 - Designing Safe R&D Equipment

Module R&D 7 - Basic Electrical Theory for R&D Workers

Module R&D 8 - Basic Facility Wiring Principles

Module R&D 9 - Control of Hazardous Energy in R&D Laboratory

Module R&D 10 - PPE for R&D Workers Based on NFPA 70E